84 ST7001+ Autopilot Control Unit - Owner’s Handbook
7 Adjusting Autopilot Settings
When you set up ST60 and ST80 instrument groups you will need to
use the following ST7001+ keys.
Press to select the required standard instrument.
Press for 4 sec to enter Group Setup mode.
Toggle to select either:
• group letter
or
• sequence number
Press to set the identification you want:
• A to H for group identity
• 1 to 8 for instrument sequence, within group
D5447-1
Press to select the required Maxiview instrument.
Press for 4 sec to enter Group Setup mode.
Toggle to select either:
• group letter
or
• sequence number
Press to set the identification you want:
• A to H for group identity
• 1 to 8 for instrument sequence, within group
Standard instruments
Maxiview instruments