Filter
Top Products
92 ST7001+ Autopilot Control Unit - Owner’s Handbook
7 Adjusting Autopilot Settings
7.5 Dealer Calibration
The Dealer Calibration group includes items that have a significant
impact on autopilot operation and can affect your boat’s safety.
CAUTION:
After you have commissioned the autopilot, you should not
normally need to alter the Dealer Calibration values.
Note: If you are connecting the ST7001+ to a non-150/400 autopilot
system, the items in the Dealer Calibration group appear in a
different order and several items will not be available. Refer to the
Appendix for full details.
Accessing Dealer Calibration
To prevent accidental access, we have made entry to Dealer
Calibration more difficult than the other groups:
• when you see the
DEALER CAL screen, press the auto key
• the display will show
CAL
• press the -1 and +1 keys together to enter Dealer Calibration
Dealer Calibration screens and settings
The items in Dealer Calibration vary according to the vessel type you
have selected. See the table on page 92 for default values.
SeaTrial Calibration lock
This screen controls whether it is possible to access Seatrial Calibration.
Note: On non-150/400 systems, the calibration lock controls whether
it is possible to enter Compass Calibration. See the Appendix for full
details.
Options
CAL LOCK OFF Calibration lock off – Seatrial calibration can be
accessed (default)
CAL LOCK ON Calibration lock on – Seatrial calibration cannot be
accessed