Filter
Top Products
Chapter 2: Basic Operation 15
2 Basic Operation
2.3 Adjusting display/keypad lighting and contrast
Lighting
Note: When the display lighting is off, the control unit illuminates the
keys at a courtesy level.
To adjust the display and keypad lighting:
1. Press
disp for 1 second from any mode to access the LAMP screen
and turn on the lights.
2. Press the
disp key to cycle through the possible illumination
settings:
LAMP 3 (the brightest setting), LAMP 2, LAMP 1, OFF,
LAMP 1, LAMP 2, LAMP 3
and so on:
• as you change the setting, the illumination on any other
SeaTalk instruments or control units will also change
3. The display automatically returns to the previous mode if you do
not press a key for 10 seconds:
• if you press another mode key within 10 seconds you will
select the mode assigned to that key (for example:
auto
selects Auto mode, standby selects Standby mode)
Note: You can also adjust the lighting level from any other SeaTalk
instrument or control unit.
Note: When you switch off the unit you lose any changes you have
made to the lighting level.
D5517-1
SECOND