Pioneer CNDV-20 GPS Receiver User Manual


 
58
If you stray from the route
If, for any reason, you stray from the suggested route, you can automatically search the route
to get back on track. This function is called “Auto Reroute”, and you can set it On or Off in
the Settings menu. For details, see Chapter 5.
If “Auto Reroute” is set “Off” and the display is in mode except “Map View”, when you stray
from the route, the display automatically switches to “Map View” and a map of your sur-
roundings appears. When you return to the suggested route, the display returns to each
view, and route guidance restarts.
If the new route requires you to travel in the opposite direction to your current heading,
guidance informing you that you need to turn around to get back to the route is displayed.
If you stray from the route being guided, and enter a new street not recorded in the disc,
the Navigation System automatically switches to “Map View”.
If you stop during the route guidance
If you stop at a gas station, or a restaurant during the route guidance, your Navigation System
remembers your destination and route information. When you start your car engine again, the
route guidance resumes from your current location.
If you parked off the set route, the route guidance resumes when you return to the set route.
Also the estimated time of arrival or travel time to your destination reappears when you return
to the set route.
When receiving traffic information ahead on the set route
This device periodically checks the traffic information of the set route. When traffic informa-
tion is received, a message appears on the display and is spoken by the voice guidance. In the
default setting of the Navigation System, if “Auto Traffic Reroute ” is set ON, this device
automatically calculates a detour route when receiving information on a traffic jam. For
details, “Confirming Traffic Information Ahead on the Set Route” below.