Pioneer CNDV-20 GPS Receiver User Manual


 
158
Initial Settings
Initial settings lets you perform initial set up of different settings for Pioneer AV Head Unit
(AVH-P6400CD or AVH-P6400).
Displaying the INITIAL SETTINGS MENU
1Press SOURCE button and hold until the source off.
2Press A.MENU (AUDIO) button and the OFF SOURCE MENU is displayed.
3Press
5
or to select “INITIAL SETTINGS”, and press A.MENU (AUDIO) button.
The INITIAL SETTINGS MENU is displayed as follows:
DETACH WARNING, AUX (AUXILIARY), REAR SPEAKER, TEL/GUIDE MUTE/
ATT
You can operate a desired function. For details, refer to the pages for each of the func-
tions.
Use the following instructions to operate each particular setting.
To cancel initial settings, press BAND/ESC button.
Switching the warning tone
If the operation panel of AV Head Unit is not detached from the AV Head Unit within five
seconds of turning off the ignition, a warning tone will sound. You can turn off this warning
tone.
1Press
5
or to select “DETACH WARNING” from the INITIAL SETTINGS MENU, and
press A.MENU (AUDIO) button.
2 Select WARNING ON or OFF with
5
/.
Pressing 5/
will switch WARNING between “ON” and “OFF”.
Switching the auxiliary setting
It is possible to use auxiliary equipment with Pioneer AV Head Unit (AVH-P6400CD or
AVH-P6400). Activate the auxiliary setting when using auxiliary equipment connected to
Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400).
1Press
5
or to select “AUX (AUXILIARY)” from the INITIAL SETTINGS MENU, and
press A.MENU (AUDIO) button.
2 Select AUX ON or OFF with
5
/.
Pressing 5/
will switch AUX between “ON” and “OFF”.