Filter
Top Products
151
Chapter 6
Combining and Using Pioneer AV Equipment
Audio Adjustments
The display for AUDIO MENU is the same regardless of which source you operate from.
■Displaying the AUDIO MENU
1Press A.MENU (AUDIO) button in each source display.
MENU is displayed.
2Press
5
or ∞ to select “AUDIO”, and press A.MENU (AUDIO) button.
The AUDIO MENU is displayed as follows:
FADER/BALANCE (fader/balance adjustment), EQUALIZER MENU (equalizer curve
adjustment), BASS (bass), TREBLE (treble), LOUDNESS (loudness), SUB WOOFER
(subwoofer), NON FADING(non fading), HPF (HIGH PASS FILTER), SLA (SOURCE
LEVEL ADJUSTMENT)
You can operate a desired function. For details, refer to the pages for each of the func-
tions.
“NON FADING” is only displayed when “S.W. CONTROL:EXTERNAL” is set in INI-
TIAL SETTINGS MENU. (SUB WOOFER is not displayed.)
➲ When the subwoofer controller setting is “S.W. CONTROL:INTERNAL” or “REAR
SPEAKER:SUBWOOFER”, you can switch the “SUB WOOFER”. (Refer to page 159.)
➲ When the subwoofer controller setting is only “S.W. CONTROL:EXTERNAL”, you can switch
the non fading output on/off mode. (Refer to page 159.)
➲ When selecting the FM tuner as the source, you cannot switch to “SLA”.
➲ Select “BACK” in the MENU display or press BACK button to return to the previous display.
➲ To return to the playback display, press BAND/ESC button.
➲ When the setting is REAR SPEAKER:SUBWOOFER, FADER/BALANCE indications are for
BALANCE.
➲ If you do not operate the audio function within about 30 seconds, the display is automati-
cally returned to the source display.