Filter
Top Products
147
Chapter 6
Combining and Using Pioneer AV Equipment
■Displaying the XM MENU
1Press A.MENU (AUDIO) button when source is XM.
2 Select “XM TUNER” and press A.MENU (AUDIO) button.
The XM MENU is displayed as follows:
CH.SELECT MODE, P.CH RECALL, P.CH MEMORY
You can operate a desired function. For details, refer to the pages for each of the functions.
➲ Select “BACK” in the MENU display or press BACK/FUNC button to return to the previous
display.
➲ To return to the frequency display, press BAND/ESC button.
➲ If you do not operate the function within about 30 seconds, the display is automatically
returned to the frequency display.
■Switching the channel select mode
You can switch if you select a Channel with a Channel NUMBER or from a Channel Cate-
gory when you select a channel.
1Press 55
55
or ∞∞
∞∞
to select “CH.SELECT MODE” from the XM TUNER MENU, and press
A.MENU (AUDIO) button.
2Press 22
22
or 33
33
to select the desired channel select mode.
CH NUMBER (Channel number select mode) - CATEGORY (Channel category select
mode)
■Recalling channel
If you press 5 or ∞ you can easily store up to six previously registered channels with the 5
or ∞ button.
1Press 55
55
or ∞∞
∞∞
to select P.CH RECALL from the XM TUNER MENU, and press A.MENU
(AUDIO) button.
2 Select a preset channel number with 55
55
or ∞∞
∞∞
and press A.MENU (AUDIO) button.
When you have finished, press BAND/ESC button to return to the source display.