140
DVD
The following explains how to use Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400) to
control a DVD, which is sold separately. For details of DVD player or Muti-DVD player opera-
tion/features, see your product’s manual.
➲ This cannot be used unless AV Head Unit is combined and the source unit is connected by
IP-BUS.
➲ In case of DVD player installed in AVIC-9DVD, see the “Operation manual” of AVIC-9DVD.
➲ In case of DVD player installed in AVIC-90DVD, see “Hardware manual” of AVIC-90DVD.
➲ For other equipment, see the Remote Control Table, table indicating the differences of DVD
operations, or the operation manual of that equipment.
➲ Read this chapter when you play CD or Video CD with the DVD player being combined.
Even when CD is played, the source will be set to DVD. (It will not indicate it as CD.)
TITLE
Shows the title number currently playing.
CHAPTER (or TRACK)
Shows the chapter number currently playing.
TIME
Shows the elapsed playing time of the current chapter (or track).
■How to watch DVD
1 Set a DVD (or CD) to DVD player.
Playback will automatically start.
The DVD disc’s menu may be displayed.
2 Use VOL dial to adjust the sound level.
Rotate to increase or decrease the volume.
3To perform fast forward or reverse, press and hold control stick right or control stick
left.
4To skip back or forward to another track, move the NEXT/PREV control to NEXT side
or PREV side.
Move the NEXT/PREV control to NEXT side skips to the start of the next chapter (or
track). Move the NEXT/PREV control to PREV side once skips to the start of the current
chapter (or track). Move again will skip to the previous track.
➲ If you continue pushing the control stick right or left for 5 seconds, the color of the fast for-
ward or reverse mark changes from white to blue. When this happens, fast forward or
reverse continues even if you release the control stick. To resume playback at a desired
point, move the control stick up.
NAVI/AV
button
N/A
1
2 3
1
2
3