Filter
Top Products
Recalling equalizer curves
There are seven stored equalizer curves that
you can easily recall at any time. Here is a list
of the equalizer curves:
Equalizer curve
S.Bass
S.Bass isa curve inwhich only low-pitchedsound is
boosted.
Powerful
Powerful is acurve inwhich low-pitched andhigh-
pitched sounds areboosted.
Natural
Natural is acurve inwhich low-pitched andhigh-
pitched sounds areslightly boosted.
Vocal
Vocal isa curve in whichthe midrange, which isthe
human vocal range,is boosted.
Flat
Flat isa flat curve inwhich nothing is boosted.
Custom1
Custom1 isan adjusted equalizer curve thatyou cre-
ate. Aseparate customcurve can be createdfor each
source.
Custom2
Custom2 isan adjusted equalizer curve thatyou cre-
ate. If youselect this curve, theeffect is reflectedall
AV source.
1 Touch [EQ] on the “AV Sound” menu.
= For details, refer to Displaying the “AV
Sound” menu on the previous page.
2 Touch desired equalizer.
p You can also sequentially select the desired
equalizer curve by touching [EQ] on the AV
operation screen of each source.
Adjusting the equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjustments can be
made with a 3-band parametric equalizer.
The difference between “Custom1” and
“Custom2”
! A separate Custom1 curve can be created
for each source. If you make adjustments
when a curve S.Bass, Powerful, Natural,
Vocal, Flat,orCustom1 is selected, the
equalizer curve settings will be memorized
in Custom1.
! A Custom2 curve can be created common
to all sources. If you make adjustments
when Custom2 curve is selected, the Cus-
tom2 curve will be updated.
! The adjusted Custom1 curve is memorized
for each of the source selected, but one
curve is shared for the following sources.
— CD, ROM, DVD-V, DVD-VR, DivX (for
AVIC-F900BTand AVIC-F90BT)
— CD, ROM (for AVIC-F700BTand AVIC-
F7010BT)
— XM and SIRIUS
— AV1 and AV2
— EXT1 and EXT2
! The different source volume level can be
set between iPod and USB.
! When [Flat] is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
[Flat] and a set equalizer curve.
Adjustable parameter s
You can adjust the center frequency, level and
the Q factor (curve characteristics) of each
currently selected curve band (Low/Mid/
High).
! Band:
You can select the equalizer band.
! Frequency:
You can select which frequency to be set as
the center frequency.
! Level:
You can select the decibel (dB) level of the
selected EQ.
Customizing preferences
En
140
Chapter
25