Filter
Top Products
INSTRUMENT BRIGHTNESS
CONTROL
The instrumentbrightness controloperates when
the headlight control switch is in
the
, or AUTO position (with auto-
lights activated).
Turn thecontrol to adjustthe brightness ofinstru-
ment panel lights when driving at night.
TURN SIGNAL SWITCH
Turn signal
᭺
1
Move the lever up or down to signal the
turning direction. When the turn is com-
pleted, the turn signals cancel automatically.
Lane change signal
᭺
2
To signal alane change, movethe lever upor
down to the point where the indicator light
begins to flash, but the lever does not latch.
FOG LIGHT SWITCH (if so equipped)
To turn thefog lights on,turn the headlight switch
to the
position, then turn the fog light
switch to the
position.
To turn the fog lights on with the headlight switch
in the AUTO position, the headlights must be on,
then turnthe foglight switchto the
position.
To turn the fog lights off, turn the fog light switch
to the OFF position.
The headlights must be on and the low beams
selected for the fog lights to operate. The fog
lights automatically turn off when the high beam
headlights are selected.
WIC1506 WIC1253 WIC1254
Instruments and controls 2-33
੬ REVIEW COPY—
2010 Armada (wzw)
Owners Manual (owners)—USA_English (nna)
03/09/09—tbrooks
੭