Filter
Top Products
1. From the single or four engine parameter display touch
the “Menu Button
2. The main menu will pop up on the display. Use the
“Arrow Buttons” to scroll through the menu until the
“Setup 4-Up Display” is highlighted.
3. Once the “Setup 4-Up Display” menu item has been
highlighted touch the “Enter Button” to activate the
“Setup 4- Up Display” menu.
4. Touch the “Enter Button” to activate the “Use Defaults”
function. This action will reset the unit to the factory
default.
COOL
1800 RPM
0
1500
3000
TEMP
ENG RPM
98%
14.2
57 PSI
1000 RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
GOTO1-UPDISPLAY
STOREDCODES
ENGINECONFG
ADJUSTBACKLIGHT
SETUP1-UPDISPLAY
SELECTUNITS
SETUP-4-UPDISPLAY
GOTO1-UPDISPLAY
STOREDCODES
ENGINECONFG
ADJUSTBACKLIGHT
SETUP1-UPDISPLAY
SELECTUNITS
SETUP-4-UPDISPLAY
USEDEFAULTS
CUSTOMSETUP
AUTOMATIC SCANOFF
DIAGNOSTIC DISPLAY
5. The “Use Defaults” screen will be displayed during the
resetting period then will automatically return to the
“Setup 4- Up Display” menu.
6. Select the “4-Up Custom Setup” from the “4-Up Setup”
menu.
7. The quadrant with the backlit parameter value is the
current selected parameter. Use the “Arrow Buttons”
to highlight the parameter value in the quadrant you
wish to place a new parameter.
8. Touch the “Enter Button” and a list of parameters will
appear.
RESTOREDTO
DEFAULTS
USEDEFAULTS
CUSTOMSETUP
USEDEFAULTS
CUSTOMSETUP
125°F
COOLTEMP
14.2
57 PSI
1000 RPM
BATTVOLT
ENGRPM
OILPRES