Filter
Top Products
Select Units
1. Starting at the single or four engine parameter display
touch the “Menu Button”.
2. The main menu will pop up on the display. Use the
arrow buttons to scroll through the menu until the
“Select Units” is highlighted.
3. Once the “Select Units” menu item has been highlighted
touch the “Enter Button” to access the “Select Units”
function.
4. Use the arrows to highlight the desired units. “English”
for imperial units i.e. PSI,”F or Metric kPa, Metric Bar
for IS units i.e. kPa, Bar, “C".
COOL
1800 RPM
0
1500
3000
TEMP
ENG RPM
98%
14.2
57 PSI
1000 RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
GOTO1-UPDISPLAY
STOREDCODES
G
ADJUSTBACKLIGHT
ENGINECONF
SETUP1-UPDISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
GOTO1-UPDISPLAY
STOREDCODES
G
ADJUSTBACKLIGHT
ENGINECONF
SETUP1-UPDISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
ENGLISH
ESPANOL
FRANCAIS
DEUTSCH
DIAGNOSTIC DISPLAY
5. Touch the “Enter Button” to select the highlighted units.
6. Touch the “Menu Button” to return to the “Main Menu”
.
7. Touch the “Menu Button” to exit the Main menu and
return to the engine parameter display.
1. Starting at the single engine parameter display, touch
the “Menu Button”.
2. The main menu will pop up on the display. Use the
“Arrow Buttons” to scroll through the menu until the
“Setup 1-up Display” is highlighted.
ENGLISH
METRICKPA
METRICBAR
ENGLISH
METRICKPA
METRICBAR
*
GOTO1-UPDISPLAY
ENGINECONF
SETUP1-UPDISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
STOREDCODES
G
ADJUSTBACKLIGHT
98%
14.2
57 PSI
1000 RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
COOL
1800 RPM
0
1500
3000
TEMP
ENG RPM
98%
14.2
57 PSI
1000 RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
GOTO1-UPDISPLAY
STOREDCODES
G
ADJUSTBACKLIGHT
ENGINECONF
SETUP-4-UPDISPLAY
SELECTUNITS
SETUP1-UPDISPLAY