Filter
Top Products
DIAGNOSTIC DISPLAY
3. Once the “Adjust Backlight” menu item has been
highlighted touch the “Enter Button” to activate the
“Adjust Backlight” function
4. Use the “Arrow Buttons” to select the desired backlight
intensity..
5. Touch the “Menu Button” to return to the main menu.
6. Touch the “Menu Button” to exit the Main menu and
return to the engine parameter display
GOTO1-UPDISPLAY
STOREDCODES
GENGINECONF
SETUP1-UPDISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
ADJUSTBACKLIGHT
ADJUSTBACKLIGHT
ADJUSTBACKLIGHT
GOTO1-UPDISPLAY
ENGINECONF
SETUP1-UPDISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
STOREDCODES
G
ADJUSTBACKLIGHT
98%
14.2
57 PSI
1000 RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
1. Starting at the single or four engine parameter display,
touch the “Menu Button”.
2. The main menu will pop up on the display. Use the
“Arrow Buttons” to scroll through the menu until “Adjust
Contrast” is highlighted.
3. Once the “Adjust Contrast” menu item has been
highlighted touch the “Enter Button” to activate the
“Adjust Contrast” function.
4. Use the “Arrow Buttons” to select the desired contrast
intensity
5. Touching the “Menu Button” will take you back through
the menus.
COOL
1800 RPM
0
1500
3000
TEMP
ENG RPM
98%
14.2
57 PSI
1000 RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
GOTO1-UPDISPLAY
ENGINECONF
SETUP1-UPDISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
STOREDCODES
G
ADJUSTBACKLIGHT
ENGINECONF
SETUP1-UPDISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
STOREDCODES
G
ADJUSTBACKLIGHT
ADJUSTCONTRAST
ADJUSTCONTRAST