Filter
Top Products
3. Once the “Setup 1-up Display” menu icon has been
highlighted touch the “Enter Button” to access the
“Setup 1-up display” function.
4. Three options are available for modification of the
1-Up display.
a. Use Defaults — This option contains a set of engine
parameters: Engine Hours, Engine RPM. System
Voltage, Battery Voltage, % Engine Load at Current
RPM, Coolant Temperature, Oil Pressure.
b. Custom Setup — This option allows for the
modification of what parameter, the number of
parameters, and the order in which the parameters
are being displayed.
c. Automatic Scan — Selecting the scan function
will cause the 1-Up Display to scroll through
the selected set of parameters one at a time,
momentarily pausing at each.
5. Use Defaults- To select “Use Defaults” use the arrow
buttons to scroll to and highlight “Use Defaults” in the
menu display.
6. Touch the “Enter Button” to activate the “Use Defaults”
function.
GOTO1-UPDISPLAY
STOREDCODES
G
ADJUSTBACKLIGHT
ENGINECONF
SETUP-4-UPDISPLAY
SELECTUNITS
SETUP1-UPDISPLAY
USEDEFAULTS
CUSTOMSETUP
AUTOMATIC SCANOFF
USEDEFAULTS
CUSTOMSETUP
AUTOMATIC SCANOFF
DIAGNOSTIC DISPLAY
7. A message indicating the “Single Engine” parameter
display parameters are reset to the factory defaults will
be displayed, then the display will return to the “Custom
Setup” menu.
8. Custom Setup- To perform a custom setup of the 1-Up
Display, use the arrow buttons to scroll to and highlight
“Custom Setup” on the display.
9. Touching the “Enter Button” will display a list of engine
parameters.
10. Use the “Arrow Buttons” to scroll to and highlight a
selected parameter (parameter with a # symbol to right
of it).
RESTOREDTO
DEFAULTS
USEDEFAULTS
AUTOMATIC SCANOFF
CUSTOMSETUP
USEDEFAULTS
AUTOMATIC SCANOFF
CUSTOMSETUP
ENGINESPEED
PERCENTLOADATCURRENTRPM
ENGINEOILPRESSURE
ENGINECOOLANTTEMPERATURE
1
3
2
Thisnumberindicates
theorderofdisplayforthe
parametersandthatthe
parameterisselected
fordisplay.