Filter
Top Products
97
Controls in detail
Locking and unlocking
Opening the trunk lid from the outside
A minimum height clearance of 6 ft.
(1.85 m) is required to open the trunk lid.
The trunk lid lock button is located in the
rear license plate recess.
1 Trunk lid lock button
̈ Press the outer left-hand side of trunk
lid button 1.
The trunk lid opens.
The trunk can also be opened using the
SmartKey (
୴ page 90) or from its inside in
an emergency, see “Trunk lid emergency
release” (
୴ page 104).
Opening the trunk lid from the inside
You can open the trunk from the inside if
the vehicle is stationary.
A minimum height clearance of 6 ft.
(1.85 m) is required to open the trunk lid.
The switch is located on the driver’s door.
1 Indicator lamp
2 Remote trunk lid release switch
̈ Pull remote trunk lid switch 2 until
trunk begins to open.
The trunk lid opens. The indicator
lamp 1 comes on and remains lit until
the trunk is closed.
!
The trunk lid swings open upwards au-
tomatically. Always make sure that
there is sufficient overhead clearance.
Vehicles with trunk lid opening/closing
system*: To stop the opening proce-
dure, press button Š. The trunk lid
stops moving.
i
If the trunk lid does not open, it is still
locked separately (if applicable)
(
୴ page 349).
Vehicles without KEYLESS-GO*: The
vehicle must be unlocked (
୴ page 88).
Vehicles with KEYLESS-GO*: If the ve-
hicle was previously centrally locked,
the trunk lid will lock automatically af-
ter closing it (
୴ page 98). The turn sig-
nals will flash three times to confirm
locking.