Filter
Top Products
105
Controls in detail
Locking and unlocking
Separately locking the trunk lid The lock is located next to the recessed
handle.
1 Locked
2 Neutral position
̈ Close the trunk lid (୴ page 98).
̈ Pull the mechanical key out of the
SmartKey (
୴ page 348).
̈ Insert the mechanical key into the
trunk lid lock.
̈ Turn the mechanical key clockwise to
position 1.
The trunk remains locked even when the
vehicle is centrally unlocked.
Separately unlocking the trunk lid
̈ Pull the mechanical key out of the
SmartKey (
୴ page 348).
̈ Insert the mechanical key into the
trunk lid lock.
̈ Turn the mechanical key counterclock-
wise to neutral position 2, see above.
You can now open the trunk (
୴ page 97).
A minimum height clearance of 6 ft.
(1.85 m) is required to open the trunk lid.
i
Your vehicle may be equipped with a
function permitting the separate lock-
ing of the trunk using the mechanical
key. If present, this feature can permit
you to deny any unauthorized person
access to the trunk by locking the trunk
separately and leaving the SmartKey
less the mechanical key with the
vehicle.
To verify the presence of this feature,
use the mechanical key to lock the
trunk and then attempt to open the
trunk by pressing the trunk lid button
after the vehicle has been centrally
unlocked with the SmartKey.
i
You can only cancel the separate trunk
locking mode by means of the
mechanical key.
Warning! G
Only drive with the trunk closed as, among
other dangers such as visibility blockage,
exhaust fumes may enter the vehicle
interior.