Filter
Top Products
125
Controls in detail
Lighting
To activate the daytime running lamp
mode, see “Setting daytime running lamp
mode (USA only)” (
୴ page 156).
Manual headlamp mode
The low beam headlamps and parking
lamps can be switched on and off with the
exterior lamp switch. For exterior lamp
switch, see (
୴ page 124).
Automatic headlamp mode
The parking lamps, low beam headlamps
and license plate lamps switch on and off
automatically depending on the brightness
of the ambient light.
̈ Turn the exterior lamp switch to U.
i
If you remove the SmartKey and open
the driver’s door while the parking
lamps or low beam headlamps are
switched on, then:
ț a warning sounds
ț $ appears in the multifunction
display.
ț the message
SWITCH OFF LIGHTS!
appears in the multifunction display
i
With the daytime running lamp mode
activated and the engine running, the
low beam headlamps cannot be
switched off manually.
Warning! G
If the exterior lamp switch is set to U,
ț the headlamps may switch off unexpect-
edly when the system senses bright am-
bient light, for example light from
oncoming traffic.
ț the headlamps will not be automatically
switched on under foggy conditions.
To minimize risk to you and to others, acti-
vate headlamps by turning exterior lamp
switch to B when driving or when traffic
and/or ambient lighting conditions require
you to do so.
In low ambient lighting conditions, only
switch from position U to B with the
vehicle at a standstill. Switching from U
to B will briefly switch off the head-
lamps. Doing so while driving in low ambient
lighting conditions may result in an acci-
dent.
The automatic headlamp feature is only an
aid to the driver. The driver is responsible for
the operation of the vehicle's lights at all
times.