Filter
Top Products
173
Controls in detail
Automatic transmission
Deactivating manual shift program
̈ Press the program mode selector
switch repeatedly until
S
or
C
for
automatic shift program appears in the
tachometer display.
or
̈ Restart the engine.
The transmission will go into the auto-
matic shift program mode last selected
(S or C).
Program mode M is not stored.
Emergency operation (Limp home
mode)
If vehicle acceleration worsens or the
transmission no longer shifts, the trans-
mission is most likely operating in limp
home (emergency operation) mode. In this
mode, only second gear and reverse gear
can be activated.
̈ Stop the vehicle.
̈ Move gear selector lever to P.
̈ Turn off the engine.
̈ Wait at least ten seconds before re-
starting.
̈ Restart the engine.
̈ Move gear selector lever to position D
(for second gear) or R.
̈ Have the transmission checked at an
authorized Mercedes-Benz Center as
soon as possible.
i
The last selected automatic program
mode (S or C) is switched on when the
engine is restarted in the automatic
program mode.