51
Getting started
Parking and locking
̄ Parking and locking
You have now completed your first drive.
You have properly stopped and parked
your vehicle. End your drive as follows.
Warning! G
Wait until the vehicle is stationary before re-
moving the SmartKey from the starter
switch. The vehicle cannot be steered when
the SmartKey is removed.
Warning! G
With the engine not running, there is no
power assistance for the brake and the
steering systems. In this case, it is impor-
tant to keep in mind that a considerably
higher degree of effort is necessary to brake
and steer the vehicle.
Warning! G
Do not park this vehicle in areas where com-
bustible materials such as grass, hay, or
leaves can come into contact with the hot
exhaust system, as these materials could be
ignited and cause a vehicle fire.
To reduce the risk of personal injury as a re-
sult of vehicle movement, before turning off
the engine and leaving the vehicle always:
ț Keep right foot on brake pedal.
ț Firmly depress parking brake pedal.
ț Move the gear selector lever to
position P.
ț Slowly release brake pedal.
ț When parked on an incline, turn front
wheel towards the road curb.
ț Turn the SmartKey to starter switch
position 0 and remove, or press
start/stop button (vehicles with
KEYLESS-GO*).
ț Take the SmartKey or the SmartKey with
KEYLESS-GO* and lock vehicle when
leaving.