Filter
Top Products
287
Operation
Tires and wheels
̈ Press the reset button on the instru-
ment cluster (
୴ page 22).
The following message will appear in
the multifunction display:
MONITOR CURRENT TIRE PRESSURE
̈ Press æ button.
The following message will appear in
the multifunction display:
TIRE PRESS. CONTROL ACTIVATED!
The tire inflation pressure monitor will
now monitor the tire inflation pressure
values of all four tires.
The following message will appear in
the multifunction display:
TIRE PRES.
DISPLAY AFTER DRIVING
A FEW MINS.
REACTIVATE USING
R-BUTTON
This display appears until the individual
inflation pressure values are matched
with the tires. The individual values are
then displayed (
୴ page 285).
If you wish to cancel activation:
̈ Press ç button.
If the following message appears in the
multifunction display:
REACTIVATE TIRE
PRES. MONITOR
or
TIRE PRES.
CHECK TIRES!
̈ Check the tire inflation pressures and
correct them if necessary.
̈ Reactivate the tire inflation pressure
monitor.
Checking tire pressure electronically*
(vehicles produced as of approximately
October 2003)
The tire inflation pressure monitor only
functions on wheels that are equipped with
the proper electronic sensors. It monitors
the tire inflation pressure, as selected by
the driver, in all four tires. A warning is is-
sued to alert you to a decrease in pressure
in one or more of the tires.
You can call up the tire pressure using the
control system (
୴ page 134).
i
Check with an authorized
Mercedes-Benz Center to determine
the equipment installed in your vehicle.