Filter
Top Products
149
Controls in detail
Control system
Fuel consumption since last reset
̈ Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
AFTER RESET
.
1 Distance driven since last reset
2 Time elapsed since last reset
3 Average fuel consumption since last re-
set
4 Average speed since last reset
Resetting fuel consumption statistics
̈ Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
̈ Press button j or k repeatedly
until you see the reading that you want
to reset in the display.
̈ Press and hold the reset button on the
instrument cluster (
୴ page 22) until
the value is reset to
0
.
i
The
AFTER START
display will flash until
a distance of approximately 1 mile
(1.6 km) has been covered or two min-
utes have elapsed since the engine was
restarted. During this period, you can
incorporate the values for the previous
journey by pressing the reset button on
the instrument cluster.
If the reset button is not pressed, the
AFTER START
values are set to
0
.