Filter
Top Products
111
Controls in detail
Seats
Placing power head restraints* upright
̈ Make sure the ignition is switched on.
All the lamps in the instrument cluster
come on.
̈ Press switch 1 in the front center con-
sole and hold.
The rear head restraints will fold up-
right.
Folding back and placing upright power
head restraints* with the switches in
the rear doors
You can fold the rear power head restraints
backward or upright using the head re-
straint folding switches in the respective
rear doors.
1 Head restraint switch, rear
̈ Make sure the ignition is switched on.
All the lamps in the instrument cluster
come on.
̈ Press switch up in direction of
arrow 1.
The rear power head restraint will fold
upright.
̈ Press switch down in direction of
arrow 1.
The rear power head restraint will fold
backward.
Head restraint tilt
You can adjust the angle manually by pull-
ing or pushing the head restraints by hand.
Warning! G
For safety reasons, always drive with the
rear head restraints in the upright position
when the rear seats are occupied.
Keep the area around head restraints clear
of articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.