Filter
Top Products
222
Controls in detail
Driving systems
The following vehicle level settings can be
selected when the vehicle is stationary:
The switch with the indicator lamps is lo-
cated in the upper part of the center con-
sole.
1 Indicator lamps
2 Vehicle level control switch
̈ Briefly press switch 2 to change from
one level setting to the next. When ve-
hicle is at level 2, pressing the switch
will return the vehicle to normal level.
The message:
ACTIVE BODY CONTROL
VEHICLE RISING!
appears in the multifunction display.
The display switches off when the vehi-
cle is raised.
Vehicle level when
stationary
Use for Ride height increase
over normal
Automatic lowering Indicator lamps
Normal Normal operation None Max. approx. 0.6 in (15 mm) Both lamps off
Raised level1 Driving with snow chains
(
୴ page 293)
Max. 0.4 in (10 mm)
1
1
Dependent on load
Max. approx. 1.0 in (25 mm) One lamp lit
Raised level 2 Very rough road surface
conditions
Max. 0.8 in (20 mm)
1
Max. approx. 1.4 in (35 mm) Both lamps lit