Filter
Top Products
54
Getting started
Parking and locking
For more information, see “Locking and
unlocking” (
୴ page 88).
Turning off the engine with
KEYLESS-GO*
̈ Place the gear selector lever in
position P.
̈ Press the KEYLESS-GO start/stop
button to shut off the engine.
With the driver's door closed, the start-
er switch is now in position 1. With the
driver’s door opened, the starter switch
is set to position 0, same as SmartKey
removed from starter switch
(
୴ page 31).
̈ Press the seat belt release button
(
୴ page 41).
Allow the retractor to completely re-
wind the seat belt by guiding the latch
plate.
Warning! G
When leaving the vehicle, always remove the
SmartKey from the starter switch and lock
your vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. Unsupervised use of vehi-
cle equipment may cause an accident
and/or serious injury.
!
If you hear a warning signal, you have
either
ț forgotten to turn off the lights be-
fore opening the driver’s door
or
ț tried to turn off the engine while the
gear selector lever is not in P.
Turn off the lights or place the gear se-
lector lever in P.
Warning! G
To prevent possible personal injury, always
keep hands and fingers away from the door
openings when closing the doors. Be espe-
cially careful when small children are
around.
Before closing doors, make sure there is no
possibility of someone getting caught in a
door during closing.