Mercedes-Benz 2009 CLS550 C Automobile User Manual


 
Starter switch positions
83
Starter switch positions
SmartKey
G
Observe Safety notes, see
page 59.
Starter switch
}
For removing SmartKey (gear selector
lever must be in park position P)
$
Power supply for some electrical consum-
ers, e.g. radio
%
Ignition (power supply for all electrical
consumers) and driving position
&
Starting position
When you switch on the ignition, all lamps
(except high-beam headlamp indicator lamp,
and turn signal indicator lamps unless acti-
vated) in the instrument cluster come on. If a
lamp in the instrument cluster fails to come
on when the ignition is switched on, have it
checked and replaced if necessary. If a lamp
in the instrument cluster remains on after
starting the engine or comes on while driving,
refer to “Lamps in instrument clus-
ter” (Y page 290).
If the SmartKey is left in starter switch posi-
tion 0 for an extended period of time, it can
no longer be turned in the starter switch. In
this case, the steering is locked. To unlock,
remove SmartKey from the starter switch and
reinsert.
The steering is locked when the SmartKey is
removed from the starter switch.
!
If the SmartKey cannot be turned in the
starter switch, the vehicle battery may not
be sufficiently charged.
R
Check the vehicle battery and charge it
if necessary.
R
Get a jump start.
To prevent accelerated vehicle battery dis-
charge or a completely discharged vehicle
battery, always remove the SmartKey from
the starter switch when the engine is not in
operation.
KEYLESS-GO
G
Observe Safety notes, see
page 59.
Vehicles equipped with the KEYLESS-GO fea-
ture are supplied with a SmartKey with inte-
grated KEYLESS-GO function.
With the SmartKey with KEYLESS-GO present
in the vehicle, pressing the KEYLESS-GO
start/stop button
R
without the brake pedal depressed corre-
sponds to the various starter switch posi-
tions (Y page 83)
R
with the brake pedal firmly depressed will
start the engine (Y page 106)
The function of the SmartKey overrules the
KEYLESS-GO function.
The SmartKey with KEYLESS-GO must be
located in the vehicle.
X
Make sure the automatic transmission is in
park position P.
X
Do not depress the brake pedal.
Controls in detail
Z