Filter
Top Products
Replacing wiper blades
313
Vehicles with SmartKey
X
Turn the SmartKey in the starter switch to
position 1.
X
Turn combination switch to wiper setting
u.
X
With wiper arms in vertical position, turn
the SmartKey in the starter switch to posi-
tion 0.
X
Remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO
X
Turn off the engine.
With the driver’s door closed, the starter
switch is now in position 1.
X
Turn combination switch to wiper setting
u.
X
With wiper arms in vertical position, open
the driver’s door.
The starter switch is set to position 0, same
as the SmartKey removed from the starter
switch.
X
Turn combination switch to wiper setting
M.
Removing wiper blades
!
Do not pull on the wiper blade inserts.
They could tear.
X
Fold the wiper arm forward until it snaps
into place.
X
Turn the wiper blade at a right angle to
wiper arm.
X
Slide the wiper blade sideways out of the
retainer.
Installing wiper blades
X
Slide the wiper blade onto wiper arm until
it locks in place.
X
Rotate the wiper blade into position parallel
to the wiper arm.
X
Fold the wiper arm backward to rest on the
windshield.
Make sure you hold on to the wiper when
folding the wiper arm back.
!
Make sure the wiper blades are properly
installed. Improperly installed wiper blades
may cause windshield damage.
Practical hints
Z