Filter
Top Products
Control system
134
Convenience submenu
R
Activating easy-entry/exit feature
(Y page 138)
Instrument cluster submenu
Access the Instr. Cluster submenu via
the Settings menu. Use the Instr. Clus-
ter submenu to change the instrument clus-
ter display settings.
The following functions are available:
R
Selecting speedometer display mode
(Y page 134)
R
Selecting language (Y page 134)
R
Selecting display (speed display or outside
temperature) for status line (Y page 134)
R
Selecting display (speed display or outside
temperature) for standard display
(Y page 135)
Selecting speedometer display mode
X
Move the selection marker with button
æ or ç to the Instr. Cluster sub-
menu.
X
Press button j or k repeatedly until
the message Display Unit Speed-/
Odometer appears in the multifunction dis-
play.
The selection marker is on the current set-
ting.
X
Press button æ or ç to set speed-
ometer unit to Km or Miles.
Selecting language
X
Move the selection marker with button
æ or ç to the Instr. Cluster sub-
menu.
X
Press button j or k repeatedly until
the message Language appears in the mul-
tifunction display.
The selection marker is on the current set-
ting.
X
Press button æ or ç to select the
language to be used for the multifunction
display messages.
Selecting display (speed display or out-
side temperature) for status line
X
Move the selection marker with button
æ or ç to the Instr. Cluster sub-
menu.
X
Press button j or k repeatedly until
the message Status Line Display
appears in the multifunction display.
The selection marker is on the current set-
ting.
Controls in detail