Filter
Top Products
495
Practical hints
Replacing wiper blades
Installing
1 Wiper blade
2 Attachment
3 Guide tab
4 Opening
̈ With guide tab 3 sliding into
opening 4, place wiper blade 1 onto
wiper arm in direction of arrow.
̈ Fold wiper blade 1 towards wiper
arm.
Tabs 2 (
୴ page 494) must engage
into both recesses of attachment 2.
̈ Check whether the wiper blade is
securely fastened.
̈ Fold the wiper arm backward to rest on
the windshield.
Make sure to hold on to the wiper when
folding the wiper arm back.
Rear wiper blade
Warning! G
For safety reasons, switch off wipers and
remove SmartKey from starter switch
(vehicles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status 0) before replacing a wiper blade.
Otherwise the motor could suddenly turn on
and cause injury.
!
Hold on to the wiper when folding the wiper
arm back. If released, the force of the impact
from the tensioning spring could crack the rear
window.
Do not allow the wiper arms to contact the rear
window glass without a wiper blade inserted.
For your convenience, we recommend that you
have this work carried out by an authorized
Mercedes-Benz Light Truck Center.
Make sure the wiper blades are properly in-
stalled. Improperly installed wiper blades may
cause rear window damage.