Filter
Top Products
252
Controls in detail
Power windows
Opening the door windows
̈ Press switch 1, 2, 3, or 6
(
୴ page 251) to the resistance point.
The corresponding door window moves
downwards until you release the
switch.
Closing the door windows
̈ Pull switch 1, 2, 3, or 6
(
୴ page 251) to the resistance point.
The corresponding door window moves
upwards until you release the switch.
If a door window encounters an obstruction
that blocks its path in a circumstance where
you are closing a door window by pulling and
holding the switch, or by pressing and hold-
ing button ‹ on the SmartKey, by press-
ing and holding the lock button (vehicles
with KEYLESS-GO*) on the door handle, the
automatic reversal function will not operate.
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from starter switch, take it with you, and
lock the vehicle. Do not leave children
unattended in the vehicle, or with access to
an unlocked vehicle. Unsupervised use of
vehicle equipment can cause an accident
and/or serious personal injury.
i
You can also open or close the windows us-
ing the SmartKey, see “Summer opening fea-
ture” (
୴ page 254) and “Convenience closing
feature” (
୴ page 256).
Depending on the current position, the power
windows may also open or close when the air
recirculation button :on the control panel of
the climate control (
୴ page 220) or automatic
climate control (
୴ page 234) is pressed and
held.
i
With the SmartKey in starter switch
position 0 or removed from the starter switch,
the windows can be operated
ț until you open the driver’s or front passenger
door
ț for at least 5 minutes
Warning! G
If you pull and hold the switch up when clos-
ing the door window, and upward movement
of the door window is blocked by some
obstruction including but not limited to
arms, hands, fingers, etc., the automatic
reversal will not operate.
୴୴