Filter
Top Products
259
Controls in detail
Power tilt/sliding sunroof*
The tilt/sliding sunroof is opened and
closed electrically. The switch for the
tilt/sliding sunroof is located on the
overhead control panel.
Sunroof switch
1 Push back to slide sunroof open
2 Push forward to slide sunroof closed
3 Push up to raise sunroof at rear
4 Pull down to lower sunroof at rear
With the sunroof closed or tilted open, a
screen can be slid into the roof opening to
guard against sun rays. When sliding the
sunroof open, the screen will also retract.
̈ Switch on the ignition (୴ page 39).
Opening and closing
̈ To open, close, raise, or lower the
tilt/sliding sunroof, move the sunroof
switch to the resistance point in the
required direction of arrows 1 to 4
(
୴ page 259).
̈ Release the sunroof switch when the
tilt/sliding sunroof has reached the
desired position.
Fully opening (Express-open) and
closing (Express-close)
̈ To fully open or close the tilt/sliding
sunroof, move the sunroof switch past
the resistance point in the required
direction 1 or 2 (
୴ page 259) and
release.
The tilt/sliding sunroof opens or closes
completely.
Stopping the power tilt/sliding sunroof
during Express-open
̈ Move the sunroof switch in any
direction.
The movement of the tilt/sliding
sunroof stops.
i
If the movement of the tilt/sliding sunroof is
blocked during the closing procedure, the
tilt/sliding sunroof will stop and reopen slightly.