Filter
Top Products
45
Getting started
Adjusting
Seat fore and aft adjustment
̈ Press the switch forward or backward
in direction of arrow 5.
Adjust the seat to a comfortable
seating position that still allows you to
reach the accelerator/brake pedal
safely. The position should be as far to
the rear as possible, consistent with
ability to properly operate controls.
Seat height
̈ Press the switch up or down in
direction of arrow 3.
Seat cushion tilt
̈ Press the switch up or down in
direction of arrow 2 until your upper
legs are lightly supported.
Seat backrest tilt
̈ Press the switch forward or backward
in direction of arrow 4 until your arms
are slightly angled when holding the
steering wheel.
Head restraint height
Vehicles with memory function*:
̈ Press switch (୴ page 44) up or down in
direction of arrow 1.
Vehicles without memory function:
1 Head restraint
2 Release button
Warning! G
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.
With a third-row seat occupied, make sure
to move the respective head restraint up
from the lowest non-use position and have
the occupant adjust the head restraint
properly.
For your protection, drive only with properly
positioned and engaged head restraints.
Adjust the head restraint in such a way that
it is as close to the head as possible and the
center of the head restraint supports the
back of the head at eye level. This will
reduce the potential for injury to the head
and neck in the event of an accident or
similar situation.
!
Do not attempt to remove front seat head
restraints. They can only be removed by qualified
technicians. We recommend that you have this
work carried out by an authorized
Mercedes-Benz Light Truck Center.
୴୴