Filter
Top Products
325
Controls in detail
Useful features
Installing
You can install the rear center console in
two different positions. In the most for-
ward position (position 1) you can expand
the cargo compartment fully (
୴ page 302)
without removing the rear center console.
1 Latch (position 1)
2 Latch (position 0)
3 Rear center console base
4 Anchorage point (position 1)
5 Anchorage point (position 0)
3 Rear center console base
6 Rear center console
̈ Position center console 6 above
base 3.
̈ Insert the tabs at rear of center
console 6 into anchorage points 4
or 5 on base 3.
̈ Guide front of center console 6 down
towards base 3.
Center console 6 must rest on
base 3.
̈ Press down on front of center
console 6 until it audibly engages in
latch 1 or 2.
Warning! G
The rear center console must be properly in-
stalled on the center console base. Driving
with the rear center console not properly in-
stalled on the rear center console base may
cause the rear center console to come loose
and be thrown around in the vehicle interior,
causing injury to vehicle occupants during
ț braking
ț vehicle maneuvers
ț an accident
i
The storage compartment and the cuphold-
ers in the rear center console are only illuminat-
ed, when the rear center console is installed in
the most rearward position (position 0).