Filter
Top Products
247
Controls in detail
3-zone automatic climate control*
Setting the temperature
̈ Make sure the front automatic climate
control is switched on (
୴ page 236).
̈ Press button > (୴ page 234).
The indicator lamp on the button
comes on.
In display e (
୴ page 234), you will see
the > symbol followed by
MODE
.
̈ Set the desired temperature for the
rear passenger compartment using
temperature control 9 (
୴ page 234).
After approximately 3 seconds after
the last adjustment, the display switch-
es back to its standard display and the
indicator lamp on button > goes
out.
Adjusting air distribution
Use the air distribution controls 3 or 5
to adjust the air distribution for the rear
passenger compartment.
The symbols on the controls represent the
following functions:
Adjusting manually
̈ Press the desired air distribution con-
trol.
The indicator lamp on button U
goes out.
Adjusting automatically
̈ Press button U.
The indicator lamp on the button
comes on. The air distribution is ad-
justed automatically.
i
You can also press the > button once
more to switch back to the standard display.
Symbol Function
Z Directs air to the center air
vents
Y Directs air to the footwells and
the side air vents