Filter
Top Products
261
Controls in detail
Panorama roof with power tilt/sliding panel*
̄ Panorama roof with power tilt/sliding panel*
Roller sunblinds for the panorama roof
with power tilt/sliding panel
The tilt/sliding panel and the front and
rear roller sunblinds are opened and
closed electrically. The switch for the
tilt/sliding panel and the roller sunblinds is
located on the overhead control panel.
The roller sunblinds only operate with the
tilt/sliding panel closed. The front and rear
roller sunblind cannot be operated individ-
ually.
Roof panel switch
1 Open roller sunblinds
2 Close roller sunblinds
̈ Switch on the ignition (୴ page 39).
̈ To open or close the roller sunblinds,
move the roof panel switch to the resis-
tance point in the required direction of
arrow 1 or 2.
Release the roof panel switch when
the roller sunblinds have reached the
desired position.
Fully opening the roller sunblinds
(Express-open)
̈ Move the roof panel switch past the re-
sistance point in direction of arrow 1
and release.
The roller sunblinds opens completely.
Stopping the roller sunblinds during
Express-operation
̈ Move the roof panel switch in any
direction.
Warning! G
When closing the roller sunblinds, make
sure that no one is in danger of being injured
by the closing procedure. The closing of the
roller sunblinds can be immediately halted
by releasing the switch.