Filter
Top Products
138
Controls in detail
Seats
Fore and aft adjustment
(second-row seats only)
The handles for adjusting the seats are
located on the front of each seat base.
1 Adjustment handle
̈ Pull up handle 1 in direction of arrow
and hold it there.
̈ Move seat to the desired position.
̈ Release handle 1.
The seat must audibly engage.
Seat backrest tilt (second-row seats)
The handles for adjusting the seats are
located on the rear of each seat base.
1 Adjustment handle
̈ While seated, pull handle 1 in direc-
tion of arrow to resistance point and
hold it there.
After adjusting rear seats, make sure
ț the seats are properly locked
ț the seat backrests are in an upright po-
sition and are properly locked
A second-row seat is properly locked only
when lock status indicator 1 is in hinged
position and red marking 2 is barely visible
(
୴ page 135).
If a seat and seat backrest are not properly
locked, the seat could move forward and the
seat backrest could fold. You could slide un-
der the seat belt during braking, vehicle ma-
neuvers, or in an accident. If you slide under
it, the belt would apply force at the abdomen
or neck. That could cause serious or even
fatal injuries.
୴୴