Filter
Top Products
277
Controls in detail
Driving systems
1 Setting current or higher speed
Adjustment in 1 mph increments (to
the resistance point) or 5 mph
increments (past the resistance point)
(Canada: 1 km/h or 10 km/h)
2 Setting current or lower speed
Adjustment in 1 mph increments (to
the resistance point) or 5 mph
increments (past the resistance point)
(Canada: 1 km/h or 10 km/h)
3 Deactivating Distronic
4 Activating Distronic or resuming to last
set speed
Activating Distronic
You can activate Distronic when the vehi-
cle speed is between 20 mph (30 km/h)
and 110 mph (180 km/h).
When Distronic is activated the multifunc-
tion display will show a message such as
DISTRONIC 55 mph
.
If Distronic has not been activated after
pressing the cruise control lever, you will
see the message
DISTRONIC Off
in the
multifunction display.
In the following cases you cannot activate
Distronic:
ț up to 2 minutes after starting the
engine
ț when you brake
ț when you have set the parking brake
ț when the automatic transmission is set
to position P, R, or N
ț if the ESP
®
is switched off
ț if the ESP
®
has switched off due to a
malfunction
Setting the current speed
̈ Accelerate or decelerate to the desired
speed.
̈ Briefly lift the cruise control lever in
direction of arrow 1 or depress in
direction of arrow 2 (
୴ page 276).
Distronic is activated and the current
speed is set.
̈ Remove your foot from the accelerator
pedal.
i
If you do not take your foot off of the accel-
erator pedal but continue to accelerate past the
set speed, the following message will appear in
the multifunction display:
DISTRONIC Override
The distance to a slower moving vehicle in front
of you will not be set. Your vehicle speed will
then be determined only by the accelerator
pedal position.