Filter
Top Products
84
Safety and Security
Occupant safety
The LATCH-type anchors are located
between the seat cushion and the seat
backrest.
1 Anchors
̈ Install child seat according to the
manufacturer’s instructions.
Installation of infant and child restraint
systems
̈ Remove the cargo compartment cover
blind, if installed (
୴ page 214).
̈ Remove the partition net*, if so
equipped and installed (
୴ page 210).
Anchorage rings for installation of top
tether straps are located on the floor
behind each rear seat.
1 Hook
2 Anchorage ring for rear right side seat
3 Anchorage ring for rear center seat
4 Anchorage ring for rear left side seat
Install child seat according to
manufacturer’s instructions.
The child seat must be firmly attached to the
right and left side anchors 1.
An incorrectly mounted child seat may come
loose during an accident which could result
in serious injury or death to the child.
Damaged or impact damaged child seats or
child seat mounting fittings must be
replaced.
Do not leave children unattended in the
vehicle, even if the children are secured in a
child restraint system.
i
With a child seat installed in the left rear
seat, the seat belt for the center seat occupied
by a passenger must operate freely.
i
Non-LATCH type child seats may also be
used and can be installed using the vehicle’s
seat belt system. Install child seat according to
the manufacturer’s instructions.
୴୴