Filter
Top Products
380
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
̈ Turn the exterior lamp switch to
position M (
୴ page 117).
Bi-Xenon headlamp Parking and standing lamp bulb
Left headlamp shown, right headlamp
laterally reversed
1 Securing screw (trim panel)
2 Headlamp trim panel
̈ Loosen and remove securing
screws 1.
̈ Remove headlamp trim panel 2 in
direction of arrow and the seal.
i
G 55 AMG (U.S. vehicles only):
Fold the brush guard down before replacing
bulbs (
୴ page 375).
G55AMG:
Remove the protective grille before replacing the
bulbs.
Warning! G
Do not remove the low beam/high beam
cover for the Bi-Xenon headlamp. Because
of high voltage in Xenon lamps, it is danger-
ous to replace the bulb or repair the lamp
and its components. We recommend that
you have such work done by a qualified
technician.