Filter
Top Products
109
Controls in detail
Seats
Installing front seat head restraint
̈ Press switch 1 upwards and hold for
about 5 seconds.
̈ Insert the head restraint into openings
on the seat backrest.
̈ Push the head restraint down until it
engages.
̈ Adjust the head restraint to the desired
position.
Multicontour seat*
The multicontour seat has an extendable
seat cushion and inflatable air chambers
built into the seat backrest to provide
additional lumbar and side support.
The seat cushion depth, seat backrest
cushion-height and curvature can be
continuously varied with switches on the
inside of each front seat.
1 Seat cushion depth
2 Backrest bottom
3 Backrest center
4 Backrest side bolsters
̈ Switch on the ignition (୴ page 39).
Seat cushion depth
̈ Adjust the seat cushion depth to the
length of your upper leg using
switch 1.
Backrest contour
̈ Adjust the contour of the backrest to
the desired position using switches 2
and 3.
Backrest side bolsters
̈ Adjust the backrest side bolsters so
that they provide good lateral support
using switch 4.
i
The guide bar with the detent must be on the
left.