Filter
Top Products
386
Practical hints
Replacing bulbs
Left tail lamp unit shown, right tail lamp
unit laterally reversed
3 Turn signal lamp bulb
4 Brake, tail, parking and standing lamp
bulb
5 Tail, parking and standing lamp bulb
̈ Press gently onto respective
bulb 3, 4, or 5 and turn counter-
clockwise out of its bulb socket.
̈ Press the new bulb gently into the bulb
socket and turn clockwise until it
engages.
̈ Reinstall tail lamp lens 2.
̈ Install and tighten securing screws 1.
Rear fog lamp bulb/Backup lamp bulb
The following description applies to both,
the rear fog lamp and the backup lamp.
Rear fog lamp shown
1 Securing screw
2 Lamp lens
̈ Loosen and remove securing
screws 1.
̈ Remove lamp lens 2.
3 Bulb
̈ Press gently onto bulb 3 and turn
counterclockwise out of its bulb
socket.
̈ Press the new bulb gently into the bulb
socket and turn clockwise until it
engages.
̈ Reinstall lamp lens 2.
̈ Install and tighten securing screws 1.
i
Do not overtighten securing screws 1.
Otherwise tail lamp lens 2 could be damaged.
i
Do not overtighten securing screws 1.
Otherwise lamp lens 2 could be damaged.
୴୴