Filter
Top Products
52
Getting started
Driving
Opening the rear center seat belt
̈ Press release button 6 on buckle 5
for the free-sliding latch plate
(
୴ page 50).
̈ Press release button 3 on buckle 2
for the fixed latch plate (
୴ page 50).
Storing the rear center seat belt
̈ Allow the retractor to completely
rewind the rear center seat belt by
guiding latch plate 1 (
୴ page 51).
̈ Guide both latch plates 4 and 7
once after the other into
attachment 1 (
୴ page 50).
Seat belt outlet height adjustment
You can adjust the height of the seat belt
guide for the following seats:
ț Driver’s seat
ț Front passenger seat
ț Rear outer seats
Adjust seat belt so that the shoulder
portion is located as close as possible to
the middle of the shoulder (it should not
touch the neck).
1 Release button
Raising
̈ Slide the seat belt guide upward in
desired position.
The seat belt guide engages in five
different positions.
Lowering
̈ Pull and hold release button 1.
̈ Slide the seat belt guide downward in
desired position.
̈ Let go of release button 1.
Make sure that the seat belt guide en-
gages into place.
Please comply with the instructions for
“Proper use of seat belts” (
୴ page 53).
Warning! G
To help prevent the possibility of injury,
always store the rear center seat belt latch
plates in the attachment when the rear
center seat belt is not in use.