Filter
Top Products
383
Practical hints
Replacing bulbs
7 Bulb
̈ Pull bulb 7 out of its bulb socket.
̈ Insert the new bulb into the bulb
socket.
̈ Hold front fog lamp 5, insert bulb
socket 6 into front fog lamp 5, and
turn bulb socket 6 clockwise to its
stop.
̈ Insert front fog lamp 5 and install and
tighten front fog lamp-securing
screws 3.
̈ Install front fog lamp trim panel 2 and
the seal.
̈ Install and tighten securing screws 1.
Front turn signal lamp bulb
1 Securing screw
2 Turn signal lens
̈ Loosen and remove securing
screws 1.
̈ Remove turn signal lens 2.
3 Bulb
̈ Press bulb 3 gently into the socket,
turn counterclockwise and remove it.
̈ Press the new bulb gently into the
socket and turn clockwise until it
engages.
̈ Reinstall turn signal lens 2.
̈ Install and tighten securing screws 1.
i
G55AMG:
Remove the protective grille before replacing the
bulbs.
i
Do not overtighten securing screws 1.
Otherwise turn signal lens 2 could be damaged.