Filter
Top Products
175
Controls in detail
Differential locks
Switching differential locks on and off
The switches are located on the upper part
of the center console.
1 Transfer case (center) differential lock
2 Rear axle differential lock
3 Front differential lock
4 Engagement indicator lamps (yellow)
5 Function indicator lamps (red)
Switching differential locks on
Transfer case differential lock
̈ Press switch 1.
The yellow engagement indicator
lamp 4 for the transfer case
differential lock comes on.
The ESP
®
warning lamp v comes
on.
When the differential lock engagement
operation has been completed, the red
function indicator lamp 5 comes on.
The message
ABS not available
differential locked
appears in the
multifunction display.
The ESP
®
warning lamp v and
the - indicator lamp in the
instrument cluster come on.
Once the transfer case differential lock
is switched on, you can now, if needed,
ț switch on rear axle differential
lock 2
or
ț switch on rear axle differential
lock 2 and front differential
lock 3.
i
The differential locks can only be switched
on in the sequence 1, 2, 3.
!
To avoid damage to the transfer case and
differential locks:
ț Engage differential locks only at low speed
(walking speed, not more than 5 mph
[8 km/h]).
ț Do not engage differential locks if the driving
wheels are spinning due to lack of traction.
ț Do not engage differential locks on paved
roads.