Filter
Top Products
43
Getting started
Adjusting
Seat fore and aft adjustment
̈ Press the switch forward or backward
in direction of arrow 3.
Seat cushion tilt
̈ Press the switch up or down in
direction of arrow 4 until your upper
legs are lightly supported.
Seat backrest tilt
̈ Press the switch forward or backward
in direction of arrow 2.
Seat height
̈ Press the switch up or down in
direction of arrow 5.
Make sure you have sufficient head-
room.
Head restraint height
̈ Press the switch up or down in
direction of arrow 1.
Head restraint fore and aft adjustment
Manually adjust the angle of the head
restraint.
̈ Adjust the head restraint to the desired
position by pushing or pulling on the
upper edge of the head restraint cush-
ion.
For more information, see “Seats”
(
୴ page 108).
Warning! G
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.
For your protection, drive only with properly
positioned and engaged head restraints.
Adjust the head restraint in such a way that
it is as close to the head as possible and the
center of the head restraint supports the
back of the head at eye level. This will
reduce the potential for injury to the head
and neck in the event of an accident or
similar situation.