Filter
Top Products
172
Controls in detail
Transfer case
Messages in the multifunction display
If a shift was not completed and one of the
following messages appears in the multi-
function display:
ț
TC shift conditions not fulfilled
The shift did not take place. At least
one shift condition was not met.
̈ Repeat the shift procedure.
ț
TC in neutral
The shift did not take place. The
transfer case is in neutral. Gear
position
N
appears in transfer case
indicator 1.
̈ Repeat the shift procedure.
ț
TC shift procedure canceled
The shift did not take place.
̈ Repeat the shift procedure.
ț
Transfer case Visit workshop
There may be a malfunction in the
system.
̈ Repeat the shift procedure.
̈ If the shift procedure still does not take
place, have the vehicle checked at an
authorized Mercedes-Benz Light Truck
Center as soon as possible.
For more information, see “Practical hints”
section (
୴ page 363).
Warning! G
If the transfer case is in neutral, transmis-
sion position P will not hold vehicle. The
parking brake must be applied to hold
vehicle in place.
i
If the SmartKey is in starter switch
position 0 or 1, an alarm will sound if the
transfer case is in neutral and the driver’s door is
opened.
Engage the transfer case to gear position HIGH
or LOW.