Filter
Top Products
130
Controls in detail
Instrument cluster
For a full view on the instrument cluster,
see “At a glance” (
୴ page 26).
1 Reset button
The instrument cluster is activated when
you
ț open a door
ț switch on the ignition (୴ page 39)
ț press reset button 1
ț switch on the exterior lamps
(
୴ page 117)
You can change the instrument cluster set-
tings in the instrument cluster submenu of
the control system (
୴ page 149).
Adjusting instrument cluster
illumination
Use reset button 1 to adjust the illumina-
tion brightness for the instrument cluster.
To brighten illumination
̈ Turn reset button 1 clockwise until
the desired level of illumination is
reached.
To dim illumination
̈ Turn reset button 1 counterclockwise
until the desired level of illumination is
reached.
Warning! G
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see infor-
mation about your driving conditions, such
as speed or outside temperature, warn-
ing/indicator lamps, malfunction/warning
messages or the failure of any systems.
Driving characteristics may be impaired.
If you must continue to drive, do so with
added caution. Contact an authorized
Mercedes-Benz Light Truck Center as soon
as possible.
i
The instrument cluster illumination is
dimmed or brightened automatically to suit
ambient light conditions.
The instrument cluster illumination will also be
adjusted automatically when you switch on the
vehicle’s exterior lamps.