Filter
Top Products
151
Controls in detail
Control system
Lighting submenu
Access the
Lighting
submenu via the
Settings
menu. Use the
Lighting
submenu to change the lamp and lighting
settings on your vehicle.
The following functions are available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
button æ or ç to the
Lighting
submenu.
̈ Press button j or k repeatedly
until the message
Headlamp mode
appears in the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to select
manual operation (
Manual
) or daytime
running lamp mode (
Constant
).
With daytime running lamp mode activated
and the exterior lamp switch in
position M or U, the low beam
headlamps are switched on when the
engine is running.
In low ambient light conditions the
following lamps will switch on additionally:
ț Parking lamps
ț Tail lamps
ț License plate lamps
ț Side marker lamps
Function Page
Setting daytime running lamp
mode (USA only)
151
Setting locator lighting 152
Setting night security
illumination
153
Setting interior lighting delayed
shut-off
154
i
Canada vehicles:
This function is not available as the daytime
running lamp mode is mandatory and therefore
in a constant mode.