Filter
Top Products
371
Operation
Tires and wheels
̈ Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display menu
appears in the multifunction display
(
୴ page 168).
̈ Press the j or k button repeat-
edly until you see the following
message:
Tire pressure monitor
active
Reactivation possible:
R-button
̈ Press the reset button (୴ page 158).
The following message will appear in
the multifunction display:
Check current
tire pressure?
̈ Press the æ button.
The following message will appear in
the multifunction display:
Tire pressure monitor
reactivated
The TPMS will now monitor the tire in-
flation pressure values of all four tires.
If you wish to cancel activation:
̈ Press the ç button.
Checking tire pressure electronically
with the Advanced Tire Pressure Moni-
toring System* (Advanced TPMS*),
(Canada only)
i
Reactivate the TPMS after adjusting
the tire inflation pressure to the infla-
tion pressure recommended for the
vehicle operating condition. Tire pres-
sure should only be adjusted on cold
tires. Observe the recommended tire
inflation pressure on the placard on the
driver’s door B-pillar (
୴ page 357).
Some vehicles may have supplemental
tire pressure information for driving at
high speeds (
୴ page 364) or for vehicle
loads less than the maximum loaded
vehicle condition (
୴ page 364). If such
information is provided, it can be found
on the inside of the fuel filler flap.
i
The Advanced Tire Pressure Monitoring
S
ystem* (Advanced TPMS*) is
equipped with a combination low tire
pressure/TPMS malfunction telltale in
the instrument cluster (
୴ page 24). De-
pending on how the telltale illuminates,
it indicates a low tire pressure condi-
tion or a malfunction in the TPMS sys-
tem itself:
ț If the telltale illuminates continu-
ously, one or more of your tires is
significantly underinflated. There is
no malfunction in the TPMS.
ț If the telltale flashes for 60 seconds
and then stays illuminated, the
TPMS system itself is not operating
properly.