Filter
Top Products
141
Controls in detail
Seats
Installing head restraints
̈ Insert head restraint 1 into openings
on the seat backrest.
̈ Push head restraint 1 down until it au-
dibly engages.
̈ Push release button 2 and adjust
head restraint 1 to the desired posi-
tion (
୴ page 139).
Armrests
The second-row seat armrests can be fold-
ed up, when loading for example, and ad-
justed.
Folding up
̈ Move the armrest into a vertical posi-
tion until it engages.
Adjusting
̈ With the armrest folded up, disengage
the armrest by pushing it towards the
rear slightly.
̈ Fold the armrest down to the lowest
and then to the desired position until it
engages.
̈ To readjust the armrest to a higher
position, move armrest up to the
desired position until it engages.
Seat heating*
Front-seat heating
The switches for front-seat heating are lo-
cated in the center console. The red indica-
tor lamps in the switch come on to show
which heating level you have selected.
i
On the second-row seats, the guide bar
with the detent must be on the left.
i
If you wish to readjust the armrest to a
lower position, you must first fold up
the armrest again and repeat the steps
above.