Filter
Top Products
146
Controls in detail
Memory function*
Storing exterior rear view mirror
parking position
For easier parking, you can adjust the
passenger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
You can switch the parking position fea-
ture on and off in the control system.
For information on activating the parking
position feature, see “Setting parking posi-
tion for exterior rear view mirror*”
(
୴ page 190).
1 Adjustment button
2 Passenger-side exterior rear view mir-
ror
M Memory button
̈ Stop the vehicle in a safe location.
̈ Switch on the ignition (୴ page 38).
̈ Press button 2 on the door control
panel.
The passenger-side exterior rear view
mirror is selected. The indicator lamp
on button 2 comes on.
̈ Adjust the passenger-side exterior rear
view mirror with button 1 so that you
see the rear wheel and the road curb.
̈ Press memory button M.
̈ Within 3 seconds, press adjustment
button 1 once more.
The parking position is stored if the
mirror does not move.
i
If the mirror does move, repeat the
above steps. After the setting is stored,
you can move the mirror again.